corner sinks!!!

Forums › Kitchen DIY Forum › Kitchen DIY Advice › corner sinks!!!

This topic has 2 voices, contains 2 replies.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
October 29, 2006 at 8:36 pm #6457

marc1106

Hello 1st time posting, wondering if anyone can help me.
have had a customer enquiry into installing a corner sink inset into a mitred and jointed laminate worktop.
Is this possible as to install the sink means to cut approx 500mm out of jointed area, this does not leave much room for the bolts!
October 30, 2006 at 11:52 am #6458

timfoley

It is possible to do this and sinks are available for this purpose but in truth it does leave joints extremely vulnerable to water ingress given the proximity of both joints.
If they do wish to go ahead Mark then I would suggest you emphasise this and ensure that any worksurface spillages are wiped up immediately.

Tim
October 30, 2006 at 7:10 pm #6459

marc1106

Tim,
thanks for the fast response, already voiced my concerns with regards to stability of the joint with client and they’ve come back to me today with a different idea.
ps keep up the good work itsa great site
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.