Damaged base unit.

Forums › Kitchen DIY Forum › Kitchen DIY Advice › Damaged base unit.

This topic has 2 voices, contains 2 replies.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
July 17, 2008 at 2:18 pm #6855

mrgrumpy

Hi Tim, eventually got round to fitting the kitchen. Base & wall units in but had a mishap when my ladders broke.(Honest). Now have a damaged white double oven housing in the shape of a crushed corner. Apart from renewing the panel any ideas would be welcome and most appreciated. Regards Ted.
July 18, 2008 at 1:08 pm #6857

timfoley

Ted,
Sorry to hear about your misfortune and hope that you didn’t suffer in the fall.
As for the damage to your oven housing I’m afraid you may obtain advice for repair but it’s a simple enough task to replace the gable.
If the damage is minor then there are repair kits available that may be suitable such as the one at the following link – (Enter as a guest – Use the advanced search facility and type in "Repair kits" then follow to page 14 and 15 of the results to locate Soft wax kits.
http://www.hafele.co.uk
This is a trade supplier but you can seek distributor nearest to you.

Hope this helps,

Tim
July 19, 2008 at 8:32 am #6859

mrgrumpy

Thanks for the speedy reply Tim. On to it already. Regards Ted.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.