electrolux esl6114 installation problem

Forums › Kitchen DIY Forum › Kitchen DIY Advice › electrolux esl6114 installation problem

This topic has 3 voices, contains 2 replies.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
May 17, 2005 at 9:35 am #5900

leadmillrules

Hi, apologies in

advance, this is a modified re-post.
I have just bought the above

integrated dishwasher, which unfortunatly came without the installation instructions. I have sorted out all the plumbing etc,

but cannot work out how to

fit the appliance in place, to stop it moving etc. We are having a stone worktop, so it

can’t be fastened to that and there doesn’t appear to be any holes etc for me to screw though

into the adjoining

units.
Can you help??
many thanks in advance.
Glen
May 22, 2005 at 1:16 pm #5907

joe

Most of the dishwashers I have dealt with

have a pair of angled clips, which slot in on both top edges, which then allow a

fixing into the sides of the ajoining

cupboards.
May 24, 2005 at 7:58 pm #5914

timfoley

My solution when fitting an integrated appliance below a stone

worktop is to install a 150mm x

564mm(For 18mm board), piece above the appliance.
The fixings for the appliance can offer stability by fixing to this piece

and at the same time it acts as a support and fixing area for the stone worktop.

Tim
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.