Fixing legs to base unit

Forums › Kitchen DIY Forum › Kitchen DIY Advice › Fixing legs to base unit

This topic has 1 voice, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
March 22, 2005 at 8:51 am #5829

glo_dogs1

Hi great site

…..
I am currently installing a new kitchen.
The

bases of the base units, all have 4 holes, which i presume is to line up the adjustable legs.
Now my question is:
Do

these holes have any relavence other than lining up the legs or is there a reason why they have been drilled right

through.
The legs which came with the units appear to just screw on to the underside of the base board, as standard.
Are

there caps available to insert into the holes on the top side of these holes ?
……… or am i missing something here!!!

Cheers,
gLo.
March 22, 2005 at 9:09 am #5830

glo_dogs1

OK..OK…its early ….and maybe i am

misssing something.

I realised soon after posting, that these holes allow for in-situ adjustment of the leg height

using a long screw driver.

I will leave this post up , in case anyone else was wondering !!!

gLo.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.