Hinge mounting

Forums › Kitchen DIY Forum › Kitchen DIY Advice › Hinge mounting

This topic has 2 voices, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
June 9, 2004 at 12:12 pm #5410

sandy sanbrook

While redoing an older kitchen I want to reuse the cabinet

carcases but need to cut down the height of the new (MDF)doors to fit – I think I can cope with that – but need to cut new mounting holes for one of the hinges – any bright ideas how

to do this please :?:

Router seems a possibility but expensive for what will hopefully be a one off job

Regards

Sandy Sanbrook
June 9, 2004 at 12:24 pm #5411

joe

Sandy, What you need is a 35mm hinge hole cutter, a

cheapish one will do for 1 set of doors.

The trouble is you really do need to either use a drilling machine, or at least a drill mounted in a stand. (hire maybe?)

With these two things and a careful approach, it’s a doddle.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.