hygena soft close srawers

Forums › Kitchen DIY Forum › Kitchen DIY Advice › hygena soft close srawers

This topic has 2 voices, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
September 10, 2008 at 7:29 pm #6893

mo herbert

It must be me, anybody know how to take out the soft close drawers on hygena flat pack units, have asked MFI and they say lift up the front of the drawer and push in a nib on each side, having raised up the drawers at the front there does not appear to be any small nibs that i can feel ,anybody seen any , any help would be appreciated

cheers

MO
September 13, 2008 at 6:05 pm #6902

surrey kitchen installer

I have a feeling that they use the Blum drawers, to remove, open the drawer fully, lift the front of the draw and slide it out. its a bit of a knack. To replace, pull the drawer runners out and place the draw on the runners, gently push home. You should hear then click into place. Hope this helps.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.