Jointing worktops

Forums › Kitchen DIY Forum › Kitchen DIY Advice › Jointing worktops

This topic has 2 voices, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
May 17, 2004 at 11:51 pm #5355

mojojogo

Tim.
Other than 22.5 and 90 degree butt and scribe joints which jigs are available, are all other joints straight butted regardless of angle.
Thanks.
May 18, 2004 at 11:01 pm #5359

timfoley

There are, to my knowledge, no other worktop jigs

available other than those you mention so to answer the question, yes, however the method of preparation does not change and worktop jigs do allow for tight joints if the angle varies

slightly from the norm. Straight butt joints may prove the only alternative in configurations outside of the conventional but still provide as good a joint.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.