plumbing-in a washer-dryer?

Forums › Kitchen DIY Forum › Kitchen DIY Advice › plumbing-in a washer-dryer?

This topic has 2 voices, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
November 7, 2006 at 2:30 pm #6463

lkj

Could anyone take me thro plumbing-in a washer-dryer appliance. eg a Zanussi or Bosch. The app. will be situated on an inside wall away from an external wall but next to an in-situ sink.
Are any pdf installation instructions available on the internet?
November 8, 2006 at 11:42 pm #6466

timfoley

lkj,

Here’s a brief explanation.
Install your taps in an adjacent cupboard, in this instance the sink base.
The washing machine waste can empty into a spigot attached to a washing machine sink waste trap. The electrical outlet can be fed via a fused spur above worktop height or via a single socket in an adjacent cupboard and the dryer wall vent will have to correlate with the position on the rear of the dryer and to prevent kinking pull it through the wall aperture before pushing it back into it’s final position.

Tim
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.