Worktop/ panel edging

Forums › Kitchen DIY Forum › Kitchen DIY Advice › Worktop/ panel edging

This topic has 2 voices, contains 1 reply.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
July 8, 2005 at 12:28 pm #5969

PaulE

I’ve read that I should iron on the edging

strips. Is this correct? If so how

do I go about it or is it better to glue on using contact glue?

Thanks.
July 11, 2005 at 2:35 pm #5976

timfoley

Iron on edging has a pre-glued edge which distinguishes it from the glue

on

application and this ultimately determines how you should apply the edge – either with contact adhesive or with an

iron.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.